US-China Fastener Tariffs: 2026 Update for Importers
This is the 2026 update to our guide on US-China fastener tariffs. The April 2025 tariff wave is now history, and the picture in 2026 is different. The IEEPA tariffs were struck down by the US Supreme Court in February 2026. Section 232 duties on steel, aluminium and copper now sit at 50%. Section 301 duties on Chinese goods remain in place. This update replaces the 2025 guide’s tariff picture with the 2026 rules. It keeps the sourcing advice that still holds.
For importers, the practical question has not changed. What does it cost to land fasteners from China, and how do you plan around duties that can move? The answer starts with knowing which duty applies to your goods. Section 232 and Section 301 stack, and the rate depends on the product’s classification.

Key Points
- Section 232 duties on steel, aluminium and copper are 50% on the full customs value from 6 April 2026.
- Section 301 duties on Chinese goods remain: 25% on Lists 1 to 3, and 7.5% on List 4A.
- The IEEPA reciprocal and fentanyl tariffs were struck down by the US Supreme Court on 20 February 2026; refunds run through the CBP CAPE process.
- Section 232 stacks with Section 301, so the total duty is the sum of both.
- A separate Section 301 forced-labour duty of 12.5% applies from 24 July 2026 to most Chinese goods, except goods already under Section 232.
- Ask your supplier for the HS code classification, a transparent quote breakdown, and the documentation that comes with the shipment.
US China Fastener Tariffs in 2026
The tariff picture for fasteners in 2026 has three parts. Section 232 duties on steel, aluminium and copper are 50% on the full customs value from 6 April 2026. That rate comes from Proclamation 11021. Fasteners made from those metals fall under that duty. Then, Section 301 duties on Chinese goods remain in place. Lists 1 to 3 pay 25%, and List 4A pays 7.5%. Also, the IEEPA reciprocal and fentanyl tariffs were struck down by the US Supreme Court on 20 February 2026. Refunds for duties paid under them run through the CBP CAPE process.
Two more facts complete the picture. The Section 122 surcharge of 10% ran from 24 February to 23 July 2026. It has now lapsed, so it no longer applies. As a result, the duties that matter now are Section 232 and Section 301. They stack: a fastener that attracts both pays both, on the full customs value. A separate Section 301 forced-labour duty of 12.5% has applied since 24 July 2026 to most Chinese goods, but goods already under Section 232 are exempt from it. The rate for any given fastener depends on its HS code classification. So the first question to ask is always which code your goods fall under.
How US China Fastener Tariffs Change the Landed Cost
Tariffs change the landed cost in three ways. The duty itself adds a percentage to the customs value, and because Section 232 and Section 301 stack, the total can be large. Customs procedures also add time: more checks, more paperwork, and more chance of delay. And upstream prices move too, as material and labour costs adjust to the new duties.
For example, a buyer who priced a project in early 2025 may find the same order costs more to land in 2026. The product price has not moved; the duty has. The way to handle this is to ask for a transparent quote. Product price, duty, freight and handling should be shown separately, with a validity period of 30 to 60 days even during market fluctuation. A quote that shows only a single total hides the duty. A buyer who cannot see the duty cannot plan around it. For the cost side in more detail, see the guide to cost factors for importing fasteners to AU NZ.
Why China Remains a Key Supplier
Despite the duties, China remains a core part of the global fastener supply chain, for good reason. Chinese manufacturers have decades of experience producing to DIN, ISO, ASME and AS standards. That keeps technical risk low. The manufacturing ecosystem is complete. Cold heading, heat treatment, plating and surface finishing, QC labs and flexible packaging often sit under one roof, which is rare elsewhere.
Chinese fastener makers also offer export readiness that new suppliers elsewhere often lack. They bring experience with OEM orders, English-speaking support teams, and packing and documentation that fit export shipping. Even with trade tension, many buyers stay with China. The hidden risk of moving is higher than the visible cost. Shifting suppliers hastily can introduce quality variation, documentation gaps and longer onboarding. Plan any move over several weeks.
US China Fastener Tariffs: A Sourcing Checklist
Do not panic-switch countries. Explore alternative sourcing only when you are confident the new supplier meets the same grade and standard. Check production speed, consistency, and the documentation and packing standards. Also keep China as a key supplier, and diversify only for low-risk SKUs.
Plan in buffer windows. Then extend your ordering cycles by two to four weeks. That allows for slower customs processing, QC re-checks, and route changes. Also ask for flexibility in quotes. Ask for multiple shipping options such as FOB, CIF or DDP, a transparent breakdown of raw material, labour and processing, and a validity period of 30 to 60 days. For the mistakes that cost importers most, see the guide to avoid these common mistakes when importing nuts and bolts.
How to Talk to Your Supplier
To avoid misunderstandings and delays, your supplier should be able to explain three things clearly. How they classify your product under the current HS codes. Then, what documentation they will provide at customs. Also, what options they can offer if tariffs rise again. A supplier who can answer all three in writing is a supplier you can plan with.
Ask the same three questions of any new supplier you consider. Then compare the answers side by side. A supplier who cannot explain the HS code classification of your goods cannot tell you what duty you will pay.
Documentation Your Shipment Needs
Under tighter inspections, the right paperwork is essential. Ask your supplier for material test reports, RoHS and REACH declarations for EU-bound goods, and the packing list and traceability records. As a result, missing papers can mean customs holds, or worse, product rejection. Keep the HS code classification and the duty calculation with the shipment records. Then the next order starts from the same numbers.
Work With Linkworld
Linkworld has 18 years of fastener export experience and runs its own cold heading workshop. Our own QC team checks head, thread, length, hardness and coating in our inspection room before every shipment. We make fasteners to DIN, ISO, ASME and AS standards, or to your drawing. We ship on FOB, CIF or DDP terms, with the documentation your shipment needs.
Frequently Asked Questions
Do US China fastener tariffs apply to all Chinese fasteners?
It depends on the product’s classification. General-use bolts and washers are more likely affected than specialty parts. The rate depends on the HS code. Ask your supplier to confirm the classification for your goods.
How can I check whether US China fastener tariffs affect my fasteners?
Ask your supplier to confirm the HS code classification and whether that product is on the current tariff list. Then check which duties apply to that code: Section 232, Section 301, or both.
Will switching to another country cut my costs?
Not always. Some regions lack technical capability or documentation readiness, and shipping costs may be higher. Compare the full landed cost.
Can a supplier help me reduce the duty burden?
Yes, in some cases, through smart packaging, bonded shipping zones, or relocating final processing steps. Ask your supplier what options fit your goods.
What is the best Incoterm under current conditions?
FOB gives you more freight flexibility. DDP is better if you need delivery cost certainty. Ask for quotes on more than one term and compare the full landed cost.
Can I still use Chinese suppliers for public projects?
Yes, as long as they meet the project’s specification and documentation requirements. Ask for the specification first, then check the supplier against it.
Need help adapting your fastener sourcing to the latest tariffs? Send your drawing, a sample photo or the specification through the enquiry form, and our team will reply with the options that fit your project.

Send an Enquiry
Send a drawing, sample or clear reference photo. Add the quantity and application if available, and we can start from the information you already have.
